How to maintain the engraving machine track

The tracks of the engraving machine are divided into circular rails and linear guides (what we call square rails). If the machine is compared to a human, then these rails are the feet that the human can move freely! It can be seen that the track plays a leading role in the engraving machine and has a vital influence on the free and flexible operation of the engraving machine! The quality of the track directly affects the efficiency of the work, and even affects the engraving effect of the entire product! The track is divided into circular track and square track.

The so-called round rail is a cylindrical linear guide rail, which is produced in my country. It has the characteristics of high bearing capacity, relatively low cost, short production cycle, and easy installation, so many processing manufacturers choose it to replace square linear guides. Circular rails have limited places to support and their rigidity is relatively poor. Deviation will occur after it is used for a long time, and its error will be larger than that of the square rail.

The square rail refers to the square linear guide rail. It is produced abroad. Its positioning accuracy is high and its friction coefficient is small, so it can maintain its accuracy for a long time. In particular, the difference between its static friction and dynamic friction is very small, which affects the driving of the equipment. Low horsepower requirements save a lot of energy. Most of the tracks on the market now use imported raw materials.

In order to improve work efficiency and reduce costs, you must pay more attention to the details of track maintenance. Different maintenance methods are required for different engraving machines.

The maintenance method for the guide rails of engraving machines such as advertising engraving machines, woodworking engraving machines, and machining centers is as follows: it is required to clean the X, Y, and Z-axis guide rail surfaces after each operation, and remove chips and dirt on the rails. Clean all the objects, and then check whether the guide rail surface is scratched or damaged. After cleaning, add lubricating oil to the guide rail to facilitate the next day's operation.

Stone engraving machine track maintenance method: Because stone engraving machines often use water, the machine is relatively humid, and the track must be maintained every day. What you must pay attention to during maintenance is when using engine oil to maintain the three-axis polished rods of Other parts should be flushed and cleaned with gasoline before adding engine oil, otherwise it will cause excessive resistance in the transmission part of the machine and lead to problems such as misalignment of the machine.

Note: No matter what kind of engraving machine you are using, you must pay attention before maintenance. Turn off all the power first and check whether it is still powered on. Only after confirming that there are no safety hazards can you proceed to the next step of maintenance! When designing your work, don’t forget to take care of our home, the earth. We advocate the green environmental protection of the sculpture industry.